Cache Audio Integration Solutions
Adding quality aftermarket audio to today's vehicles is becoming more and more challenging. Automobile manufactures include so much function and control that replacing the factory radio is no longer an option. Everyone knows that any audio system is only as good as its source. Now that source can be your factory CD/DVD or navigation unit. Caché OEM integration products give you the same clean, high voltage, low impedance source signals that could previously only be found in expensive aftermarket headunits. As today's vehicles change, the way we look at adding aftermarket audio has to change as well. With Caché integration solutions you don't have to make a sacrifice to get great sound. :: Visit the Website!
Audison Voce
The Voce project was born to make Thesis sound quality accesible to a wider, still demanding audience. The development of these components took advantage of the main innovations applied during the design of the Thesis line: drastic reduction of non-linear distortions, linearization of electric and acoustic load, control of membrane and cone back wave reflections. In order to achieve these goals, new materials had to be developed, new mouldings for baskets and cones had to be designed, new assembly and quality control procedures had to be prepared; a delicate work of analysis and refinement, that brought to achieving results which exceeded our own expectations, establishing a new reference for its own category. The development of these new loudspeakers started from the drawing of the motor assemblies as well as their delicate interaction with the voice coil assembly, to obtain a linear magnetic flux, stability of the magnet working point and of the modulation of the coil inductance. The result derives from an over-optimization of geometries and materials; the voice coil of all the components were made in extremely light Copper Clad Aluminium Wire, on Kapton former. The woofer surrounds re-use the tested profile developed for the Thesis components: triple wave in butyl rubber for the surround and nomex fabric for the spider. The new die-cast baskets of AV 5, AV 6.5 and AV 12 models take inspiration from the Thesis characteristics, and thanks to a delicate optimizing action they meet the two main requirements expected from these components: linearity in acoustic load on the back of the membrane and absence of mechanical resonances in the band-pass. The same attention to mechanical design was devoted to the structure of the AV1.1 tweeter; its front acoustic load is extremely linear, maximizing off-axis response; the rear damping chamber features an annular geometry, adjust¬ing its characteristics with the needs of the membrane, also using an efficient and linear damping material, especially developed for this tweeter. The woofer super-light membranes are made out of treated cotton fibre and pressed-paper, with a finish ensuring control of the breakup resonances in :: Visit the Website!
IQ Smart Solutions
Put your world in reach... IQ products are full of innovation and forward thinking - solutions designed with you in mind to make life a little easier in a complicated world. Be smart. Products:In-vehicle mounts for portable GBS, BlackBerry, iPhone, iPod, Sirius, XM & many other devices. Check us out today. :: Visit the Website!